MURICKENS GROUP Since 1975
Charging controller is an automatic DC current device that controls and manages DC power. It can modulate or boost the DC input and give out constant amount of required DC out put current and it manages the storage and utilization of current. The flow of DC current produced from SOLAR power or WIND power are not at a constant level, it always vary with the availability of sunlight or the wind. The charging controller boosts the input current for charging and reduces the current when the current flow is excess and keep the voltage always at a constant level without losing any current. Let it be any other source that has a DC current source, the charging controller functions like a transformer and modulates the input and out put current and keep the current flow always at a constant level but without any power lose. Charging Controller can be used in DC electronic equipments for the smooth functioning of LED lightings ,DC fan , DC CFL, DC music systems , security camera, navigation equipments which is used in ships and bouts. It is an independent and economical Direct Current power supply for a whole house, house boats and ships with a separate dc wiring. It is an only ideal source of electric supply for places where there is no electricity like deserts. It has only an initial expense.
The main advantage of the system is we can convert any brand electronic inverters to solar power by charging the batteries with the help of sufficient capacity of flyline solar panel solar and charger.
FLYLINE SOLAR CHARGE CONTROLLER MORE INSTALLATION IMAGES:-CLICK HERE
MOSFET Pulse Width Modulation Solar Charging Controllers (PWM) Common Features
* It is commonly used products. * MOSFET charging controllers are used for smaller and medium power controlling units. * The technical features of MOSFET and IGBT are same. * The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, Protections in Battery reverse, PV reverse, Overload and Short circuit. * Our product connection diagram printed on it.* Micro controller base. * LED and LCD display-battery voltage, load on/off, battery condition charging on/off. * Up to 20amp Auto detection for 12v/24v (automatic sensing). * 50 amp for 36v/48v
FLYLINE PWM/MOSFET SOLAR CHARGER CONTROLLER TECHNICAL FEATURES |
|
Switching |
Back to back PWM IGBT/MOSFET base |
Nominal battery voltage |
12 v to
48 V v dc |
Maximum out put amp |
6AMP-100AMP |
Stand by consumption |
less than 1w |
Charging REG |
2 stage |
Battery tem combination |
5MV@40DIG |
Product Display |
LED or LCD |
Minimum input voltage |
16V@12V |
Battery input |
8 to15 Volt (for 12 V).19 to 30 Volt ( for
24 V) |
Panel input |
10 to30 Volt (for 24 V).21 to 60 Volt ( for
24 V) |
Battery input |
32 to 60 Volt ( for 48 V) |
Panel input |
40 to 120 Volt ( for 48 V) |
Mobile charging |
USB & DC SOCKET |
DC LOAD |
UN REGULATED |
IGBT Solar Charging Controllers. (INSULATED-GATE BIPOLAR TRANSISTOR
► It is used for high voltage regulations. ► It is commonly used products. ► IGBT charging controllers are comparatively law coast charging controllers that can be used for smaller and higher power controlling units. ► The technical features of MOSFET and IGBT are same. ► MOSFET/ IGBT solar charging system is very cheaper than MPPT. ► The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, Protections in Battery reverse, PV reverse, Overload and Short circuit
FLYLINE PWM/IGBT SOLAR CHARGER CONTROLLER TECHNICAL FEATURES |
|
Switching |
Back to back PWM IGBT base |
Nominal battery voltage |
72 v to 240V DC |
Maximum out put amp |
50AMP-200AMP |
Stand by consumption |
less than 1w |
Charging REG |
2 stage |
Battery tem combination |
5MV@40DIG |
Maximum input voltage |
324V@240V |
Minimum input voltage |
130V@96V |
DC LOAD |
UN REGULATED (Optional ) |
MPPT ( maximum power point Tracker) charging controller
► In art of the solar MPPT (maximum power point Tracker) determine the ideal operating point via processor –controller algorithm .This Significantly of incident light and temperature. ► The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, Protections in Battery reverse, pv reverse, Overload and Short circuit. ►MPPT solar charger have a power to increases the photovoltaic array power yield. ►It is most suitable for smaller power applications.►Micro controller base. ►LCD display-battery voltage, load on/off, battery condition charging on/off.
FLYLINE MPPT SOLAR CHARGER CONTROLLER TECHNICAL FEATURES |
|
Nominal battery voltage |
12v to 24 v dc |
Maximum out put amp |
20amp |
Maximum solar array |
200w@ 24v |
PV open CKT voltage |
75v @24 v design |
Stand by consumption |
less than 1w |
Charging REG |
5 stage |
Battery tem combination |
5MV@40DIG |
Switching method |
Buck boost DC to DC converter |
Maximum Efficiency |
98% |
Our standard models are: 6 A, 10A, 15A, 20A and up to 200 A
Flyline Solar Charge Controller Images :- Click Here
Flyline Solar Charge Controller Details :- Click Here
Product Short Informative Videos:- Click here
Product Detailed Informative Videos:- Click here
Useful technical informative videos:- Click here
ENQUIRY
Watts of some electronic products we use :- Click Here
Flyline Solar power plant installation video of MG Marketing System:- Click Here
Murickes BrouchureClick Here
Some of our GOVT clients list :-Click Now
For quick response & order-call ( 91) 09400464444, 09447366779, 08281848484