FLYLNE SOLAR CELL AND FUNCTION

  MURICKENS GROUP Since 1975  

A photovoltaic module or photovoltaic panel is a combination of packaged interconnected assembly of photovoltaic cells, also known as solar cells. These cells are made of two layers of semiconductor material. When light enters the cell, electrons are forced to flow between the layers to produce current. With the help of Solar energy a single photovoltaic module can produce a certain amount of wattage, installations intended to produce larger electrical power capacity require an installation of several modules or panels and this is known as a photovoltaic array. The Photovoltaic electric cell uses generate electrical energy when the surface of the cell is exposed to electromagnetic radiation. In kerala climate 1000 W solar panels can create between 4 Kwh to 4.5 Kwh electricity per day.

There are different types of solar panels poly-crystalline, mono-crystalline and Mono PERC. They are made-up of silicon. The main difference is that the poly-crystalline material is made up of millions or billions of small silicon crystals, but Mono-crystalline material is made up of one large single crystal of silicon. The major quality difference is mono-crystalline solar panel is more efficient at converting photons to electrons for electricity while the poly-silicon is less efficient because electrons are captured or generated less efficiently where the crystals of silicon touch. Poly-crystalline panels are commonly used because the manufacture cost is less and so we get these panels in competitive price. Mono crystalline solar cells can create current at cloudy condition and even when it is raining Murickens group market these high quality ISO certified solar panels in whole sale and retail price in kerala. We are using 5 busbar (5BB) cells.Mono PERC solar cells have an additional layer with the back side of the cell. This layer allows some of the sun�s rays to reflect back into the solar cell, gives them an opportunity to be turned into energy. So that , this cells produce huge amount of energy than conventional cells

We can convert any branded Normal inverter to solar power with the help of using recommended capacity of Flyline solar charge control and solar panel.

We uses top 10 imported solar panels.They are - Trina Solar, JA Solar, Canadian Solar, JinkoSolar and LONGi Solar.All are Highly efficient and good quality based.

HALF CUT SOLAR PANEL

Half-Cut Solar Cells :- Half-cut solar cells are cut into halves (two solar panels fixed in a single frame). The top and bottom portions work independently. One portion is active even if the other is shaded. It is applicable when the area has shade. That improves the solar module's performance. They are also known as "twin cells." Robotic technology is used throughout the manufacturing process by the top ten world-class manufacturers. Here, solar modules are cut into two halves. Each half works as a separate unit. I.e., it works independently and each unit will produce separate current. The main advantage of half-cut solar panels is that they reduce manufacturing costs. Let�s see, a half-cut solar panel with 600 W power requires only 2.2 meters of length and 1 meters of width. We can use the full cut of two panels (300 W x 2 = 600 W panel) instead of the 600 W half cut. Each individual unit has 300 W of power, which requires a space of 1.6 meters in length and 1 meters in width for each panel. This requires space near to double compared to the 600 W half- cut single panel. Manufacturers benefit the most from half-cut solar panels because they reduce their manufacturing costs in a frame, glass, and so on. In this way, customers have only one benefit, which is that they save some of their installation space. If there is any damage to the panel, that will affect the customer. All the benefits are to the manufacturers. In practical experience, full- cut small-wattage solar panels are very useful and more efficient compared to half-cut solar panels. But in the future, the market availability of solar panels will be in the form of half cuts. Muricken's solar products have various top-level international quality certifications and awards. We also use highly efficient solar panels.

We are use world-class top-10 imported solar panels. Those are:Trina Solar Panels, JA Solar Panels, Canadian Solar Panels, Jinko Solar Panels, REC Solar panels, etc. It is a highly efficient �A� grade Mono PERC full and half-cut solar panel manufactured using Advanced Robotic Technology.

  

What is the benefit of half-cut cell solar panels�?

� Half-cut solar cells are more useful to the manufacturers. It reduces a lot of risk factors, like cell breakage during the manufacturing time.
� This reduces manpower, maintenance, and fabrication costs.
� One portion is active even if the other half is shaded.
� It not only cuts the cells in half but also reduces them overall manufacturing costs.
� Panel rates are calculated as per watts. It helps manufacturers to produce high capacity panels that can be accommodated in a limited space.
� On the customer side, the main benefit is to save installation space slightly.

FEATURES OF SOLAR CELLS

► High quality solar Photovoltaic Silicon Mono / Multi crystalline panels or Cells. ► It is union of solar cells for desired capacity. ► Light weight and designed for getting maximum utilization. ► Resistant to abrasion, hail impact, rain, water and environmental factors. ► Anodized aluminum frame and pre-drilled mounting holes. ► Tempered glass for rugged protection. ► ISO 9001- 2015 certified. ► IEC 61215 certification by Euro Test and TUV. ► 5 years warranty. ► We are using 5 busbar (5BB) cells.
Different wattage panel is available like 25W, 50W, 100W, 125W, 275W, 315W, 335W, 345W, 390W, 420W and 540W.




Global Top Ten solar panel manufactures



SOLAR PANEL TECHNICAL SPECIFICATION

 

Mono Crystalline / Mono PERC

Nominal Max. Power (Pmax) 275 W 315 W 390 W 420 W
Opt OperatingVoltage (Vmp) 31.5 V 33.1 V 40.4 V 44.9 V
Opt. Operating Current (Imp) 8.74 A 9.52 A 9.66 A 10.1 A
Open Circuit Voltage (Voc) 38.3 V 40.87 V 48.2 V 53.8V
Short Circuit Current (Isc) 9.38 A 9.80 A 10.7 A 10.82 A
Module Efficiency 16.70% 19.36% 19.70% 20%
Max. Series Fuse Rating 15 A 15 A 15 A 15 A
Application Classification Class A Class A Class A Class A
module weight 18 Kg 20 Kg 22 Kg 23.4Kg
Power Tolerance 0 ~ + 5 W 0 ~ + 5 W 0 ~ + 10 W 0 - + 10 W
M.Size 1663.7x990.6 mm 1640x992 mm 2000x992 mm 2078x992 mm
Max. System Voltage 1500V (IEC) or 1000V (IEC
Operating Temperature 40�C ~ +85�C
Module Fire Performance CLASS C (IEC 61730)

Half-cut Solar Panels

Nominal Max. Power (Pmax) 320 W 390 w 440 W 500W 550W 600W
Opt. Operating Voltage (Vmp) 35.6 V 40 v 40.8V 41 V 41.47 V 45.25 V
Opt. Operating Current (Imp) 9.51 A 9.75 A 9.85 A 11.53 A 12.90 A 13.26 A
Open Circuit Voltage (Voc) 37.70 V 48.5 V 42.9 V 45.5 V 49.45 V 55.03 V
Short Circuit Current (Isc) 19.5 A 10.30 A 10.52 A 12.17 A 13.79 A 21.46% A
Module Efficiency 19.10% 19.2% 20.01% 20.07% 21.30% 21.46%
Max. Series Fuse Rating 20 A 20 A 25A 25 A 25 A 30 A
Application Classification CLASS A Class A Class A Class A Class A Class A
M.size 1685*992*35mm 2024 *1004 mm 2063*1026 mm 2187�1102�35 mm 2279 mm*1134 MM*35 mm 2465�1134�35 mm
module weight 19 Kg 22 Kg 23.5 Kg 28 kg 30 kg 34.6 kg
Power Tolerance 0 ~ + 5 W 0 ~ + 5 W 0 ~ + 5 W 0 ~ + 5 W 0 ~ + 5 W 0 ~ + 3 W
Max. System Voltage 1500V (IEC) or 1000V (IEC)
Operating Temperature 40�C ~ +85�C
Module Fire Performance CLASS C (IEC 61730)

POLY CRYSTALLINE

Nominal Max. Power (Pmax) 275 W 335 W 375 W
Opt. Operating Voltage (Vmp) 31.12 V 38 V 39.4 V
Opt. Operating Current (Imp) 8.85 A 08.82 A 9.55 A
Open Circuit Voltage (Voc) 38.5 V 46.1 V 47.67 V
Short Circuit Current (Isc) 9.52 A 09.31 A 10.10 A
Module Efficiency 18.38% 18.38% 18.58%
Max. Series Fuse Rating 15 A 15 A 15 A
Application Classification Class A Class A Class A
M.size 1648x990mm 1950x990mm 1998x1010mm
module weight 18.2Kg 20 Kg 23.8Kg
Power Tolerance 0 ~ + 5 W 0 ~ + 5 W 0 ~ + 5 W
Max. System Voltage 1500V (IEC) or 1000V (IEC)
Operating Temperature 40�C ~ +85�C
Module Fire Performance CLASS C (IEC 61730)

POLY / MULTI CRYSTALLINE 12V

Nominal Max. Power (Pmax)
25 W 50 W 75W 100 W 125 W
Opt. Operating Voltage (Vmp) 17.8 17.9 17.9 17.49 V 22.40 V
Opt. Operating Current (Imp) 1.124 A 2.84 A 4.31 A 5.94 A 7.40 A
Open Circuit Voltage (Voc) 21.4 V 21.4 V 21.4 V 21.46 V 23.8 V
Short Circuit Current (Isc) 1.305 A 3.28 A 4.76 A 6.39 A 6.45 A
Module Efficiency 17% 18.8% 19% 19% 19%
Max. System Voltage 1000V (EU) 1000V (EU) 1000V (EU) 1000V (EU) 1000V (EU)
Max. Series Fuse Rating 10.A 10.A 10.A 10.A 10.A
module weight 1.05 KG 3 KG 6 KG 7 KG 8 KG
Operating Temperature 40°C ~ +85°C
Power Tolerance 0 ~ + 3 W





 

Flyline Solar Panel Picture : Click Here 

Flyline Solar Panel Details :Click Here

Product Short Informative Videos:- Click here 


Product Detailed Informative Videos:- Click here 


Useful technical informative videos:- Click here 


      


ENQUIRY
Watts of some electronic products we use :- Click Here

Flyline Solar power plant installation video of MG Marketing System:-  Click Here

Murickens GOVT clients list :-  Click Here

        

Murickes Brouchure :- Click Here

For quick response & order-call ( 91) 09400464444,  09447366779, 08281848484